Login
Go to Search
Computers & Displays

TeknoPro

Product Summary:

Product Type: Desktop
Registered In: Switzerland
Manufacturer: Teknoservice S.L.
EPEAT Tier: Gold
Registration Date: 2019-06-28
Product Status: Active
European Article Number(s): 8436541612280, 8436541616981, 8436541616998

All unique product identifiers existing for this product may not be listed here. If the unique product identifier you are looking for is not listed, please contact EPEAT at EPEAT@GEC.org.

 

EPEAT Tier Score Detail

For a product to be listed on the EPEAT Registry, it must, at a minimum, meet the applicable “required” criteria. Click here to see a list of the required criteria for this product category.

This product has met the necessary required criteria.

Along with required criteria, products can also meet optional criteria and score optional points. It is not required for a product to achieve any optional points.

Products that meet all required criteria and achieve less than 50% of the optional points are rated at
EPEAT Bronze
Products that meet all required criteria and achieve 50 - 74% of the optional points are rated at
EPEAT Silver
Products that meet all required criteria and achieve 75 - 100% of the optional points are rated at
EPEAT Gold
The optional criteria for this product category and optional points achieved by this product are listed below.
Optional Criteria
Scores
4.1 Substance Management
11 / 14
  • (4.1.2.1) Restrictions of the use of cadmium
    1
  • (4.1.4.1) Restriction of the use of beryllium
    1
  • (4.1.5.2) Further reduction of bromine and chlorine content of plastic materials
    0
  • (4.1.6.1) Avoidance or elimination of substances on EU REACH Annex XIV (authorization list)
    1
  • (4.1.6.2) Reduction of substances on the EU REACH Candidate List of SVHCs
    0
  • (4.1.9.1) IEC 62474 declarable substances
    1
  • (4.1.9.2) Requesting substance inventory
    1
  • (4.1.9.3) Acquiring substance inventory
    2
  • (4.1.10.1) Reduce fluorinated gas emissions from flat panel display manufacturing
    2
  • (4.1.10.2) Reduce fluorinated greenhouse emissions from semiconductor production
    2
4.2 Materials Selection
3 / 3
  • (4.2.1.2) Higher post-consumer recycled, ITE-derived post-consumer recycled plastic, or bio-based content
    2
  • (4.2.1.3) Post-consumer recycled, ITE-derived post-consumer recycled plastic
    1
4.4 Product longevity/life-cycle extension
2 / 2
  • (4.4.2.2) Publicly available service information
    1
  • (4.4.2.5) Product upgradeability and repairability
    1
4.5 Energy Conservation
3 / 4
  • (4.5.1.3) Energy efficiency for internal power supplies
    1
  • (4.5.1.5) Product energy consumption less than the ENERGY STAR Maximum Energy Limit
    2
4.7 Packaging
2 / 2
  • (4.7.3.2) Packaging composed of recycled, and/or biobased, and/or sustainably forested content
    1
  • (4.7.4.1) Offering of a bulk packaging option
    1
4.8 Life cycle assessment and carbon footprint
6 / 6
  • (4.8.1.1) Product life cycle assessment and public disclosure of analyses
    2
  • (4.8.1.2) Product specific greenhouse gas emissions—product carbon footprint
    2
  • (4.8.2.1) Corporate carbon footprint
    1
  • (4.8.2.2) Greenhouse gas emissions from product transport
    1
4.9 Corporate Environmental Performance
5 / 9
  • (4.9.1.2) Third party certified environmental management system (EMS) for supplier manufacturing facilities
    1
  • (4.9.2.2) Corporate environmental performance reporting by suppliers
    1
  • (4.9.3.1) Energy management system/energy performance improvement –manufacturers
    0
  • (4.9.3.2) Energy management system/energy performance improvement for suppliers
    1
  • (4.9.4.1) Renewable energy use by manufacturer
    2
  • (4.9.4.2) Renewable energy use by manufacturer suppliers
    0
4.10 Corporate social responsibility
4 / 6
  • (4.10.1.1) Socially responsible manufacturing: Labor
    0
  • (4.10.1.2) Socially responsible manufacturing: OHS
    2
  • (4.10.2.2) Participation in an in-region program that advances responsible sourcing of conflict minerals
    1
  • (4.10.2.3) Smelter and refiner participation in OECD-aligned third party mechanisms
    1
Total Optional Criteria Score:
36 / 46
Please note that it is not required for a product to achieve any optional points.
Some optional criteria may not be applicable to a product. Optional criteria that are not applicable (N/A) to the product are not included in the Total Optional Criteria Score, and are not reflected above.
For any questions, comments, or feedback regarding the EPEAT Registry, please contact us.

Computers & Displays Product Category Required Criteria

All EPEAT Computers & Displays Products must meet, at a minimum, the following required criteria.

(4.1.1)
Product carbon footprint disclosure and assurance
(4.1.1.1)
Conformance with European Union ROHS Directive substance restrictions
(4.1.2)
Corporate GHG Inventory
(4.1.3.1)
Elimination of intentionally added mercury in light sources
(4.1.5.1)
Reduction of bromine and chlorine content in plastic parts >25 grams
(4.1.7.1)
Compliance with provisions of EU Battery Directive
(4.2.1)
Manufacturer GHG reduction target aligned with climate science
(4.2.1.1)
Minimum post-consumer recycled plastic, ITE-derived post-consumer recycled plastic or bio-based plastic content
(4.3.1)
Communication of energy management requirements for key component facilities
(4.3.1.1)
Identification of materials and components requiring selective treatment
(4.3.2.1)
Plastic parts compatible with recycling
(4.3.2.2)
Plastic parts separable for recycling
(4.4.1)
Manufacturer use of renewable electricity
(4.4.1.1)
Service support
(4.4.2.1)
Removal of external enclosure
(4.4.2.3)
Spare parts
(4.4.2.4)
Battery replacement and information
(4.5.1.1)
Conformance to current ENERGY STAR program requirements
(4.5.1.2)
Lowest Power Mode limit
(4.6.1)
Conformance with applicable ENERGY STAR® product eligibility criteria
(4.6.1.1)
Provision of product take-back services
(4.6.2)
External power supply energy efficiency
(4.6.2.1)
Provision of a removable rechargeable battery take-back program
(4.6.3)
Battery charger system energy efficiency
(4.6.3.1)
End-of-life processing
(4.7.1.1)
Elimination of intentionally added heavy metals in packaging
(4.7.1.2)
Elimination of elemental chlorine as a bleaching agent in packaging material
(4.7.2.1)
Separable packaging material
(4.7.2.2)
Plastics marked in packaging materials
(4.7.3.1)
Recycled content in wood-based fiber packaging
(4.9.1.1)
Third party certified environmental management system (EMS) for design and manufacturing organizations
(4.9.2.1)
Corporate environmental performance reporting by manufacturer
(4.10.2.1)
Public Disclosure regarding conflict minerals in products